Aircom End Node: Efficient Data Collation and Transmission

Aircom Key Features:

• Intrinsically safe (I.S.), approved for ATEX Zone 0 and Class 1 Div. 1
  Compliant for explosive, hazardous environments
• Secure long-range data transmission end to end with LoRaWAN
  AES-128 data encryption end-to-end, send data up to 10+ miles
• Low power
  Up to 10-year battery life, can power sensor with 10.6-16.5VDC output
• Flexible and expansive
  Acts as a datalogger, RTU, or PLC for monitoring and control applications. MQTT and  Modbus TCP Gateway option for direct SCADA/DCS communication.

Intrinsically Safe

• Connect I.S. sensors directly to Aircom without the need for third-party I.S. barriers
• Operating in explosive atmospheres (ATEX Zone 0 or C1D1) is common in the oil and gas industry and many other hazardous environments, which makes it absolutely critical to ensure equipment in these areas meets the requirements. It is typical for manufacturers to run long wires to their I.S. device from a safe area where a third-party protective barrier is located or place these barriers inside an explosion/flameproof enclosure to be closer to the equipment in the hazardous area. Third party barriers are costly and require additional installation or engineering considerations. A battery-powered solution like Aircom can be pole-mounted in a hazardous area right next to the I.S. sensors, allowing for safe monitoring while simplifying your IIoT deployment.

Secure from End to End

• Using LoRaWAN AES-128 encryption for secure, long-range data transmission
• Aircom uses LoRaWAN® (Long Range Wide Area Network) to wirelessly transmit data from field devices to a secure gateway up to 10+ miles away. LoRaWAN sends data securely (AES-128 encrypted) with no recurring fees (license-free sub-GHz radio frequency) compared to what you’d normally find with a cellular data plan. By deploying gateways to cover your desired areas, LoRaWAN allows you to deploy your own private telemetry network where you own the hardware and data end-to-end.

Low Power

• Long battery life and digital outputs set it apart from the competition
• Aircom edge devices are battery powered with up to a 10-year battery life depending on the application, removing the need to rely on power-heavy cellular networks or run AC power to the device. This allows for simplified installation and increased time between required maintenance. Additionally, Aircom allows for its analog inputs to be configured as digital outputs to power a device, drive solenoid, and more, by using its configurable 10.6-16.5VDC output.

Flexible and Expansive

• Simple and modular, Aircom is easy to deploy
• Aircom installs easily, lowering upfront capital and installation costs. Its pole and wall-mounted options make it simple to install near the equipment with no trenching required for power or signal cables. Once the Aircom device is online, simply use the app (iOS or Android) to configure the I/O and begin transmitting data. Get the data back to your SCADA or DCS system via Modbus TCP or MQTT options.
• Safety and security are top of mind in oil and gas, and that’s why Aircom fits this industry so well. Not only is it built for the most hazardous environments, but its ease of deployment and low cost of operation make it ideal for flexible, integrated industrial asset monitoring and management.

Contact our team to learn how our Aircom solutions bring cloud-based, live data monitoring to your field operations team.